Allparts Telecaster Roasted Quarter Sawn Maple Licensed Fender Neck

Allparts Telecaster Roasted Quarter Sawn Maple Licensed Fender Neck

• Allparts Licensed Fender "V to C" Profile Style 57 Replacement Telecaster Neck, Similar Clapton Stratocaster;
• One-piece maple neck cut on edge, roasted wood, unfinished, raw to receive a varnished or oiled finish;
• It is not a neck and thick "chunky" neck but a real "soft V" Allparts TM0-VRQ reference;
• Average width at 41.8 vintage nut, skunk stripe on the back, the frets are thin and low, vintage style.

Allparts Telecaster Roasted Quarter Sawn Maple Licensed Fender Neck

Please note that the photos are indicative: Each neck is different, the color, finish, grain may vary due to a wide variety of maple and variable browning from one neck to another. All of these Allparts may require planning and fret polishing depending on the fitment being made. This is normal and not a defect. All allparts handles must be carefully inspected before installation and/or modification, they are all individually prepared and Allparts cannot guarantee a neck that has not been fully finished, varnished and protected: Moisture, sweat and temperature can cause irreversible warping and twisting.

These necks are made of the highest quality maple prepared in the USA or Japan. No neck is identical to another, they may all differ slightly. All handles have a limited warranty against defects in materials and workmanship. The warranty does not cover normal wear and tear or modifications made by the customer.

Allparts Telecaster Neck "Roasted" Roasted Maple Slice Cut

• Allparts under license TMO-VRQ profile "V to C" thin Strat Clapton type;
• New handle to be prepared and varnished;
• Diameter of the holes for the machine head tuners : 8.65mm;
• Single action trusrod, Phillips heel screw adjustment;
• Progressive neck thickness: .85" to .96";
• Radius (inch): 10";
• Width at Nut: 41.8mm max;
• Nut to mount and adjust;
• Width at 21st case heel: 55.8mm (not perforated);
• 21 narrow tall frets (.079" x .051");
• 1-piece "Quarter sawn" neck with "skunk stripe" walnut back;
• The wood is raw, dark and ready to receive a varnished or oiled finish.